Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Why Sandy Springs Homeowners Choose Trane Air Duct Cleaning
Trane Air Duct Cleaning in Sandy Springs, GA costs between $395 and $850 for a full system on a typical single-family home, depending on how many returns and supply runs your house has and whether the ducts need sealing or repair along with the cleaning. We’re an independent Trane service provider, not a factory-authorized dealer, and we’ve spent years working on Trane systems throughout Sandy Springs, including the variable-speed setups that put more strain on ductwork than older single-stage units.
Trane builds efficient, long-running HVAC equipment. What many Sandy Springs homeowners don’t realize until they call us is that the ductwork attached to that equipment is a separate system with its own lifespan, and it often fails before the Trane unit itself does. Paul Adeyemi, owner at Mortons Air Duct Sandy Springs, puts it this way: “I’ll tell you exactly what I’m going to do, and exactly what it will cost, before I do anything.” That approach matters when you’re dealing with Trane ductwork that may need more than a basic vacuum-out. Call (229) 495-2691 for a written quote before any work starts.
Why Trust Mortons Air Duct Sandy Springs for Your Trane Air Duct Cleaning?
Our crew works on Trane duct systems and air handlers across Sandy Springs every week, and we know how higher static pressure from variable-speed blowers and sealed attics hits ducts harder here. Trane’s XV20i and S9V2 lines move air differently than the older equipment many homes were built around, and that difference shows up as specific failure patterns most general duct cleaners never diagnose. We do.
Paul grew up in Los Angeles and learned the mechanical side of HVAC systems through the HVAC Technology program at Los Angeles Trade-Technical College before putting down roots in Georgia. For several years now, he and his crew have serviced homes throughout Sandy Springs, including the quiet neighborhoods around Abernathy Road, and he takes particular care with houses where kids and pets share the same floors as the vents being cleaned. Every technician who arrives at your door is background-checked, uniformed, and working to the Cedarwell Care Promise: shoe covers and drop cloths before the hose comes off the truck, a written price before the work starts, and a photo of the clean-up before the crew leaves.
We also stock the cleaning products and materials a Trane system actually needs. For coil cleaning we use no-rinse foaming cleaners approved for Trane’s aluminum coil coating. For duct sealing we use commercial-grade mastic and R-8 insulated flex, not whatever happens to be on the shelf at the supply house that week. When you own a Trane, generic shortcuts in the ductwork undo everything the equipment was engineered to do.
Styles & brands we work with
Common Trane Air Duct Cleaning Problems We Fix in Sandy Springs
Here’s what we find when we open up Trane duct systems in Sandy Springs homes. If one of these sounds like your house, the cleaning probably needs to include a repair or seal step, not just air whipping.
- Flex duct liner separation along trunk lines. Trane variable-speed blowers, especially on XV20i systems, maintain higher static pressure than older PSC blower motors. In Sandy Springs homes where the attic duct runs date back to the 1980s or 1990s, that extra pressure peels the inner liner away from the flex duct wall. The liner collapses inward over time, strangling airflow. Your Trane unit keeps running efficiently, but the rooms at the end of the trunk get weak, warm air. Cleaning alone won’t fix this. We identify the separated sections during the camera inspection and replace the damaged flex as part of the job.
- Condensate bio-growth inside Trane Hyperion air handlers. The Hyperion series has a tight, insulated cabinet that’s great for efficiency. It’s also great at holding humidity, and in Sandy Springs we see coil fouling and musty-smelling air more often in Hyperion units than in open-panel air handlers. The evaporator coil sits in a dark, damp box for months at a time. Algae and biofilm grow on the coil surface, restricting airflow and blowing that stale smell through the house. We treat the coil with a no-rinse foaming cleaner and clean the drain pan and line during the service.
- Crushed or kinked return flex behind Trane air handlers. This one shows up in Sandy Springs two-story homes where the attic mechanical closet doesn’t leave much room behind the unit. The return drop gets squeezed between the air handler and the wall, and the Trane blower motor strains to pull air through it. Homeowners hear whistling at the return grille, or notice the system runs longer than it used to. We re-route and re-support the return flex during duct cleaning, and seal the plenum connection with mastic.
- Dust and drywall debris on Trane aluminum evaporator coils after renovations. Mid-century ranch homes in Sandy Springs have the original sheet metal trunk lines and branch ducts, and when someone renovates the kitchen or finishes the basement, drywall dust gets pulled into the return side and packed onto the coil. Trane’s aluminum coils are more corrosion-resistant than the old copper ones, but they still choke on construction dust. A coil cleaning is part of our full Trane air duct service whenever the camera shows buildup on the fins.
- Unsealed duct joints pulling crawlspace air into the system. The Riverside Drive area has plenty of homes with crawlspaces and duct runs that were never sealed properly. A Trane system on the cooling side creates negative pressure in the return ducts, and every unsealed joint becomes a vacuum pulling in damp, dusty crawlspace air. The result is dust you can’t get ahead of, no matter how often you change the filter. We seal the joints with mastic as part of the service so the cleaning actually holds.
Trane Parts & Our Repair-vs-Replace Approach
When duct sealing or flex duct repair is needed on a Trane system, we use commercial-grade mastic and R-8 insulated flex matched to the original duct sizing. Trane doesn’t sell its own branded ductwork separately, so there’s no “OEM duct” to buy. The right move is heavy-duty flex and a proper mastic seal, which is what we carry on the truck. It lasts longer than the silver tape-and-hope method we see on a lot of Sandy Springs installs.
For coil and blower cleaning, we use manufacturer-approved no-rinse foaming cleaners that preserve Trane’s aluminum coil coating and avoid chemical damage. The question we hear most from Trane owners is whether to repair the ductwork or replace it. Our honest answer: if the flex duct liner has separated, the section gets replaced. If the metal trunk line has a loose joint, it gets sealed. We don’t recommend replacing ducts that still have life, and we don’t try to squeeze another year out of ducts that are done. You’ll see the camera footage before any recommendation is made. Call (229) 495-2691 and we’ll show you exactly what we’re seeing.
Our Trane Service Process – Step by Step
Here’s what happens when we service a Trane system in Sandy Springs, from the first phone call to the photo of the clean-up.
- 1
Diagnosis. The technician walks the home with you, checks the Trane air handler location, counts supply and return runs, and runs a camera through the ducts. On variable-speed Trane XV20i systems, we’ll also take a static pressure reading to see if the blower is working against a restricted duct system. You get a written price after the diagnosis, before anything else happens.
- 2
Cleaning and repair. We clean the supply ducts, return ducts, evaporator coil, and blower assembly with professional equipment from Rotobrush and Nikro. If the camera showed separated flex, crushed return lines, or unsealed joints, we make those repairs during this same appointment. Shoe covers and drop cloths stay in place the whole time, and we use quieter tools when your kids or pets are in the home.
- 3
Testing. After the clean, we re-test static pressure if the system called for it, run the blower, and check airflow at the vents. The Trane system should move air the way it did when the ducts were first installed. If a whistling sound is gone and the rooms feel balanced, we know the job’s done right.
- 4
Warranty. Every job carries the 365-Day Done Right Promise. If something isn’t right within a year, we come back and make it right. Full stop. You’ll also get a photo of the clean-up area before we leave, so you can see how the space looked when we walked out.
See the difference
Before
After
Before
After
Before
AfterTrane Products We Service & Install in Sandy Springs
We service and clean the ductwork and air handler components on Trane’s residential lineup throughout Sandy Springs, and we also offer Air Duct Cleaning for other major brands. That includes the XV20i variable-speed heat pump and air conditioner, the S9V2 gas furnace, the Hyperion air handler series, and the TAM9 air handler. Our team sees these units in all kinds of Sandy Springs homes: original ranch houses with crawlspaces, newer two-story builds with attic-mounted systems, and everything in between. We stock R-8 flex duct, mastic, coil cleaner, and blower brushes sized for Trane cabinets on the truck, so the job doesn’t stall while someone runs to the supply house.
We Also Service These Brands
Most Sandy Springs homes don’t have only one HVAC brand in them, and neither do we-we also handle Trane repair in Kennesaw. Along with Trane systems, our crews regularly service and clean ductwork attached to Lennox and Carrier equipment. The duct failures we find are often brand-specific, so working across multiple brands every week keeps our diagnostic instincts sharp. If you have a Lennox or Carrier unit at home, the same written pricing, Cedarwell Care Promise, and 365-Day Done Right Promise apply.
FAQs – Trane Air Duct Cleaning Service in Sandy Springs
A whistling noise after duct cleaning on a Trane variable-speed system almost always means the return side is undersized or there’s a kink in the return flex, and the cleaning changed the airflow just enough to expose it. On XV20i and S9V2 systems, the blower modulates and varies static pressure. If the return duct is marginal, the blower will pull harder and whistle at the grille. In Sandy Springs homes with attic mechanical closets, the return flex behind the air handler is often crushed against the wall. Duct cleaning doesn’t cause this, but it can reveal it. We’ll check the return path during our diagnosis. Give us a call at (229) 495-2691 and we’ll pinpoint it.
No, you should leave the Trane system running in fan-only mode while we clean the supply and return ducts. The airflow from your blower helps carry loosened dust toward the collection vacuum, which is connected at the plenum. If the system is off, that dust settles back into the ducts. We handle the thermostat settings before and after the cleaning, so you don’t have to touch anything.
Sandy Springs sits in a heavy pollen corridor, especially through the spring when pine and oak pollen peak. That pollen gets pulled through the return duct, past the filter, and onto the evaporator coil inside your Trane Hyperion or TAM9 air handler. Once the coil is sticky from spring pollen, dust and debris stick to it all summer. The result is restricted airflow and a musty smell. A coil cleaning every year or two in Sandy Springs is not excessive; it’s realistic.
Sometimes, yes. The Trane equipment might be 5 years old, but in many Sandy Springs homes the ductwork is 25 or 35 years old. The unit gets replaced, the ducts stay. A newer XV20i or S9V2 furnace is frequently connected to older flex and sheet metal runs that have been in place since the Clinton administration. If the ducts are original to a 1980s or 1990s build, they likely need cleaning and probably sealing. A camera inspection tells us exactly what’s in there. Call (229) 495-2691 to schedule one.
No, a proper Trane air duct cleaning service in Sandy Springs always includes the air handler’s coil and blower assembly. Cleaning only the ducts while leaving the coil and blower wheel dirty is like changing the oil filter and leaving the oil. The blower wheel, the evaporator coil, and the drain pan are all part of the air path, and on Trane Hyperion units the tight cabinet makes the coil side even more important. Our full service covers supply ducts, return ducts, coil treatment, evaporator coil cleaning, and the blower assembly in one visit.
For a typical Sandy Springs single-family home, a full Trane duct cleaning service with coil and blower cleaning runs between $395 and $850. The final number depends on how many supply and return registers you have, whether the system has one return or multiple returns, and whether our camera inspection turns up repairs like separated flex liner, crushed return duct, or unsealed joints. We give you a written price per system before any work begins, and that price doesn’t change halfway through the job. Call (229) 495-2691 for an exact quote and a free estimate.
Book Your Trane Service in Sandy Springs, GA
If you own a Trane system in Sandy Springs and the airflow isn’t what it used to be, or you can’t remember the last time the ducts were touched, call us. We’ll diagnose what’s going on, give you a written price, and take care of your home the way we’d take care of our own. Call (229) 495-2691 today.
Written by Paul Adeyemi, Owner at Mortons Air Duct Sandy Springs, serving Sandy Springs and surrounding areas since 2005.